Morcemcolor Plus Flexible CG2 AW 5kg

Composition

High-strength, water-repellent product based on cement, with high-purity aggregates, pigments, and antifungal and anti-algae preservative.

Features and applications

• AQUASTOP Effect: Repels surface water from the joint, creating a pearl effect.
• BIOACTIVE Technology: Contains a preservative with fungicidal and algaecide properties.
• High resistance to abrasion.
• High hardness.
• Intense colour.
• Easy to clean.
• Very thin texture.
• Little water absorption.
• Crack resistance.
• Suitable for interior and exterior use.
• Water repellent.
• Deformable.
• Compatible with radiant heating floors.

Substrates

• Empty joints must be dry and clean throughout their length and depth.
• Before starting the application, PROTECMOR temporary sealer protects porous and non-porous ceramics from potential pigment stains.
• Do not apply on top of gypsum, plaster, anhydrite, or any other substrates with high content of sulphates, or in contact with water or moisten with high content of sulphates.

Instructions for use

• Add water (29%-33%) and mix manually or mechanically until getting a consistent paste (not a liquid one)
• Let the paste rest around 5 min. then mix again.
• Working in small areas, fill the joints with a rubber trowel or rechargeable gun, compacting the material firmly.
• The application should be done diagonally across the joints, pressing the mixture onto them, and removing excess material.
• Allow the material to dry slightly for 20 – 30 minutes.
• When the paste becomes matte, proceed to clean the surface with a slightly damp, hard sponge.
• Only when the product has hardened in the joint, polish the surface with a clean, dry cloth to remove any remaining dust.
• Let it dry for 24 hours before normal transit.
• If the ceramics get stained, you can use a specific cleaning product if it does not damage the ceramics, taking care not to touch the joints (refer to the product instructions).